Industrial Central Vacuum Systems for Source Capture Applications
Central high vacuum fume and dust collection systems ideal for on tool and on torch source capture applications and general housekeeping and
material transportation.
High suction power
Ideal for on-tool and on-torch source capture and general housekeeping
ATEX certified units available for combustible dusts
Watch our Industrial Vacuum Systems in action
Nederman supplies a wide range of powerful compact units comprising of a vacuum source, control system and filter. The L-PAK, E-PAK and
FlexPAK products are suitable for handling welding fumes, grinding dust, swarf and general cleaning. The air driven 450A, 471A, 600A and 722A products
are suitable for material transport, recycling of material and more heavy duty cleaning needs.
C-Pak is suitable for welding fume applications such as shipyards. The VAC20 and RBU should be used together with the Nederman Flexfilter and advanced starter.
Browse these categories under "Central vacuum Systems"
450A dust collectors with NCF filterSingle container system for fixed installation. Equipped with NCF
filter which is automatically cleaned at each system stop. Cyclonic discharge of the material into a container of 47 liters (12 gal). Can be supplied
with antistatic or conductive parts to avoid sparks from static electrical discharge. Powerful vacuum unit suitable for recovery of liquids, dust and
granulated material. The unit is efficient for collecting greasy chips from lathes and drilling machines in a central suction system.
471A dust collector with pre-separatorNederman\'s 471 Industrial Vacuum has a dual container system for
fixed installation with built in frame. Grit and granulate discharge for splitting blasting grit from dust. Installed on silo for grit storage. Dust
is discharged in the NVF filter and collected in a container. The filter is automatically cleaned at system shut off, or can be done automatically by
installation of a timer control system. Heavy-duty vacuum unit for material collection over rather long distance. Suitable for collection of mixed
dust and granulated products.
600A dust collector for coarse dustsSilo system with high suction capacity for fixed installations.
Designed for the collection of dusty materials such as granules, steel grit and recovery of precious metals. The silo is equipped with a manual
discharge valve. Can be supplied with counterweight or pneumatic valves for automatic operations. Equipped with the efficient and self-cleaning NCF
filter. The unit can be fitted with automatic remote control. The unit is often used as power pack in central suction systems.
710A dust collector with self-cleaning filterFor blasting shot recoveryThis robust and extremely powerful
system is designed for the recovery of blasting shot. Equipped with automatic pneumatic pinch valve and automatic self-cleaning NCF filter. Most of
the dust is separated from the blasting shot or from the collected granulates. The dust is channelled into its own container, while the blasting shot
or granulated material is fed back into the blasting pot, onto conveyors or into other containers.
722A Industrial Vacuum with pre-separatorAn extremely powerful vacuum unit for the collection of blasting
grit and other granulated material. The combination of high vacuum and high airflow make material transport over long distance possible. Compact
design, built on a frame with the possibility of transportation by forklift. Equipped with grit and dust separator. The clean grit is collected in a
silo and can be re-used. The dust is trapped in a high efficient NCF filter and discharged into a dustbin.
950A Ex tank stripping vacuum cleaning systemATEX approved vacuum cleaning system for tank stripping ship
tanks on board oil tankers and product carriersThis heavy duty stainless steel industrial vacuum unit is excellent for suction of hazardous and
flammable liquids. Tank stripping vacuum system can transport material over long vertical and horizontal distances.
C-Pak Heavy Industry Fume ExtractorSemi-portable filter for welding extraction, on-torch or nozzles for
heavy industriesFor welding extraction, on-torch or nozzles. Semiportable installations. Unit including Nederman FlexFilter cyclone for coarse
separation. Manual start/stop. The units have four 100mm (4 in) diam. for the C-PAK 20-1500 and 160mm (6.3 in) diam. for the C-PAK 20-2500 vacuum
inlets with connection flanges suitable for the Nederman PAK hose and coupler system. Flow restrictor and combined back flush/start-up valve is
standard.Compact designEasy to transportLow maintenance costs
E-PAK Fume and Dust CollectorSelf contained vacuum unit for capturing welding fume and dustVacuum units
with direct-driven side-channel fan fitted as one unit on a steel frame together with starter, control unit and integrated 24V transformer. The unit
has automatic start/stop and automatic filter cleaning. Filter separation in two stages. Central inlet with velocity reduction feature and bag type
fine filters.
FlexPak Dust and Fume CollectorSelf contained filter for welding fume, grinding dusts, metal chips and
moreVacuum unit with direct-driven side channel fan fitted as one unit on a steel profile fram together with starter, control unit and integrated 24V
transformer. Automatic filter cleaning. For extraction of welding fume, grinding dust, metal turnings, composite materials, dust and particles but
also as a central extraction unit for cleaning systems for workplaces and machines. The FlexPak is also available in an Ex version to handle
combustible dusts.
L-PAK Dust and Fume CollectorThe Nederman L-PAK Dust and Fume Collector offers the ideal solution for
removing dust and fumes in all types of industries. Typical areas of applications can be found in welding shops, car body shops, construction
industries, bakeries, industrial laundries, etc. The L-PAK is also perfect for cleaning of the workplace and the workshop floor.
