Clean Room and Lab type Dust Collection

Ultra quiet design. Four Stage Filtration System Removes Dust, Odors, andmicroscopic particles and microbes. Less than half the size of competitive air cleaners Three speed system for proper cleaning of rooms from250 to 1000 square feet. Handles laboratory airborne particles with trueHEPA filtration - captures particles smaller than 0.3 microns. Captures airborne bacteria and viruses. Simple and economical filter replacement. Long life motor assures years of maintenance free operation. Weighs a fraction of other air cleaners while maintaining the best filtration and air cleanliness available.

Powerful suction Quiet operation (55dbA) Compact, space saving design Low maintenance design High efficiency tri-layered disposable bag Optional HEPA, Odor, Fume Filtration Accumulator pre filter for precious metal reclamation Optional remotes Designed for any production facility that is interested in promoting a dust, odor, and fume free environment. Single work-station dust collector with large accumulator Electrical Voltage115.00 VAC Amperage10.00 Amps Dimensions Product Dimensions (L"xW"xH")20.00" x 18.00" x 27.00" Shipping Dimensions (L"xW"xH")25.00" x 20.00" x 18.00" Weight Product Weight 42.00 lbs. Shipping Weight48.00 lbs. Available Options: Now available in 100V, 220V, 230V, 240V @ 50/60Hz

New M Series Micro dust collector unit used for abrasive dust capture and other dry materials. HEPA Filter Captures 99.97% @ 0.3 microns. Electronic filter clean maintenance system.

N Series Micro dust collector unit used for abrasive dust capture and other dry materials.
HEPA Cartridge Filter Captures 99.97% @ 0.3 microns.
Push button air pulse clean maintenance system.
Super Quiet 59 dBa
Large Dust tray
2 1/2, 3 or 4" Plumbing Up to six (6) workstations can connect
Variable Speed Control
Airflow = 260 CFM, Suction = 17.4 kPa (69.83 in H2O)

Auto pilot switch gear allows operators tool to activate and control on/off of dust collector unit without interrupting work flow.

Cyclone accumulator allows cyclonic action on captured particles to be removed well ahead of the primary filter, preserving its life. Placed inline between the dust source and filter unit, allowing fine particles to "spin-out" of the airsteam.

Capture nozzles allow direct control over the source which generates dust when a hood or port is not part of the machine. Operators can move, bend or flex the nozzle head in many configurations that "hold" the shape and position of where the dust is coming from. Large size allows full flow conditions.