Fire - Explosion Provision Options

An effective Spark detection system must monitor all potential paths of a spark or ember through all branches of ducts and once a spark or ember is detected, it must establish a curtain of water through which the spark must pass. Each main duct system is considered a protection zone. If your dust collector has a single main duct, then only one zone is required. The air in the ducts is travelling at a very great rate of speed and therefore carries a spark or ember very rapidly.

The Spark Eliminator is suited for welding, grinding, plasma cutting and laser cutting applications and can be retro-fitted to existing dust collection systems. It can fit any duct run and does not require additional dust collection point return.

Much like Explosion Vents, the Interceptor®-QR® is a passive Explosion Protection technology that mitigates the effects of a dust deflagration by allowing the hot gases and burning material to safely escape the vessel being protected. However, unlike Explosion Vents that simply relieve to atmosphere, the Interceptor®-QR® has a built in quenching chamber that traps the dust emitted from a deflagration and absorbs the heat from the flame and burning gases. The Stainless Steel Mesh that comprises this chamber then acts as a heat sink to quench the temperature and break the chain reaction, effectively interrupting the explosion in mid-stream. The dust and flame retention capability of the Interceptor®-QR® make it ideal for indoor Explosion Venting applications. With a simple installation, easy refurbishment, and process friendliness, the Interceptor®-QR® is a superior Explosion Mitigation technology.

Precision Dust Collection Systems offers the Stat-X family of fire suppression systems that are NFPA 2010 compliant, green and based on a revolutionary, condensed aerosol fire suppressant agent composed of ultra-fine particles and inert gas. Un-pressurized until activated, the Stat-X patented aerosol formingcompoundproduces large quantities of tiny, buoyant 1-2 micron sized condensed particles indiscernible to the naked eye. The aerosol quickly suppresses fire by chemically interfering with the free radicals of flame and is easily vented after application.

Precision Dust Collection Systems, Brixon Latches