Nederman Dust Collection Products

Dust Collectors for wood, paper, chemicals, minerals and moreNederman\'s range of baghouse dust collectors are suitable for various types of dusts such as wood waste, saw dust, chemical, mineral, combustible dust and more.The airflow through bag filters can be from the outside to the inside of the filter (the particles separated accumulate on the outside of the bag) or the other way around, depending on the application. The particles are normally captured on the internal surface of the bag filter.Bag filters are designed to be cleaned when they are clogged not replaced. Baghouse dust collectors are normally cleaned by manually cleaning, mechanical shaking, reverse air, or by air pulse.

Cartridge Dust CollectorsFilters for automotive, composite dusts, paper waste, welding smoke and more.Cartridge Dust Collectors have a large filter area in proportion to their size and are suitable for dry, fine dust and can be equipped with lots of different types of filter materials. Cartridge Dust Collectors are preferable on systems with contaminations lower than 100 ppm, or contamination levels lower than 0.01% in weight.All Nederman units come standard with our patented UniClean cartridge filter. The UniClean is one of the longest lasting and highest efficiency cartridges on the market today. The higher internal cleaning pressure and the uniform cleaning of the cartridge reduces energy costs and increases cartridge life because less compressed air is required for efficient cleaning.

Central Vacuum SystemsIndustrial Central Vacuum Systems for Source Capture ApplicationsCentral high vacuum fume and dust collection systems ideal for on tool and on torch source capture applications and general housekeeping and material transportation.High suction powerIdeal for on-tool and on-torch source capture and general housekeepingATEX certified units available for combustible dusts

Control equipmentWe offer a wide range of control equipment for our dust collectors and fans and we can design solutions tailored exactly to meet specific demandsWe offer a wide range of control equipment for our dust collectors and fans and we can design solutions tailored exactly to meet specific demands

Cyclone Dust CollectorsCan be used as pre-separators or protective devices from hot particlesCyclone dust collectors can be used as pre-separators to reduce the dust load reaching the final filter, or as protective devices to remove large hot particles from the gas or air stream to prevent damage to the filter material. High efficiency cyclones require more energy and therefore have higher running costs. Lower efficiency cyclones are often more effective when used together with a final filter or dust collector, as they allow a better mix of particle sizes to reach the filter material, which can help to extend the useful working life of the filter material.

Dustless blasting equipmentPortable dustless blasting equipment with superior productivity, suction power and blasting media recyclingNederman abrasive dustless blasting equipment has superior suction power and separation efficiency. The Vacuum Blaster provides for real dustless blasting and is a real productivity booster day in and day out thanks to the design of the vacuum head along with the close circuit continuous, non-pulsing stream of the blasting abrasive. No dust or blasting abrasive flying aroundDustless blasting in enclosed spaces where regular blasting is not permittedNo need for special blasting roomsThe blasters are mobile, flexible and offers low start-up costs

Exhaust extractionVehicle exhaust extraction for cars, trucks, buses, fire trucks, ambulances and other emergency vehiclesExhaust emissions from a cold-start engine can reach toxic levels within a closed building. Even though the vehicles are run only a short time indoors and with open doors, the odorless carbon monoxide (vehicle exhaust) builds up in the building. Without control and removal of the vehicle exhaust fumes they can lead to worker illness, heavier facility maintenance and damage to the sensitive electronics of diagnostic and servicing equipment in the workshop.Exhaust extraction at sourceThe most effective method of capturing and removing of vehicle exhaust fumes is capture at source. Capturing the vehicle exhaust gases provides a safer and more pleasant working environment.

All Nederman extraction arms are highly flexible, and simple to position, extend and retract. Different attachments are available for wall, ceiling or extension bracket mounting as well as a number of accessories, including hoods and dampers to improve efficiency. The arms are connected to a vacuum and filter system removing the contaminants from the extracted air so that it can be returned to the atmosphere or recycled without negative effects.

Fume extraction hoods and downdraft tables are highly effective at removing hazardous fumes and dusts generated by welding, grinding, polishing and other applications. Contaminants in the air are drawn away from the welder\'s breathing area

Fans and BlowersEvery dust, fume or mist collection system needs and fan to move the contaminated air through the filter for cleaning. Nederman has a complete range of fans for single machine dust extraction to shops with hundreds of machines.Vacuum PumpsFor when you need the extra suction power for conveying heavy materials through a long duct run. Nederman Vacuum Pumps offer compact powerful suction for those applications when needed.

Oil mist eliminators and coolant filtersRecycle your mists and coolants back to your machinesReplacing mists and coolants can get expensive. Nederman oil mist and coolant filters extend the life of your mists and coolants by recycling them back into your machine. They separate the coolant and mist from the air and dirty particles allowing you to extend your mist and coolant life, which saves you money.Extend the life of your mists and coolantsSaves you money on not replaceing them as oftenContains mists and coolants to keep your work area safe and clean

CoolersFor use in most any type of hot gas treatment the KS & KU coolers handles temperatures up to 590C (1,100F)Hot process gases are often generated in combustion processes or in the processing of melted metals, especially in melting of ferrous, nonferrous and aluminum. Before the hot gas can be filtered it has to be cooled down in coolers/heat exchangers. The heat can be recycled to save energy.The cooling air must be preheated if there is any risk of the temperature on the cooling elements dropping below the acid dew point when cooling hot process gases. Nederman has consequently developed the cassette-type KU cooler specifically for cooling such gases.

Nederman is globally recognized as the state-of-the-art manufacturer specialized in industrial vacuum cleaners for collecting and transporting dry or wet materials, masses and liquids.

To handle oil, grease and various fluids effectively, you need special equipment. Our systems for distributing oil, grease and other liquids reduce wastage, give practical and ergonomic benefits and enable control of consumption. Our solutions are used in places like service workshops for cars, trucks, civil engineering and agricultural machinery.

Automated processes for material separation, transportation and handlingEfficient material transport is vital in any modern operation. The most primitive method, used in many shops large and small, is to allow the production waste to accumulate in the base of the machine or filter until the operator manually cleans them out in self defense and packs them into a container for further processing. The manual handling is both time consuming, costly and may pose risks for injuries. With Nederman material handling and separation products the process can be automated and the following savings can be achieved; savings in internal transportation costsno danger of injuryclean working areas and great flexibility.

Dust extraction kits for hand held toolsA range of dust extraction manifolds to fit more than six hundred different hand tools is available. The system is suited for most grinding and cutting tasks.Nederman manifolds for grinding machines can be easily connected to a stationary system from Nederman or to one of our mobile dust collectors for maximum efficiency. Capturing the dust directly from the grinding machine prevents it from spreading, which significantly improves the working environment and in many cases the quality of production. For advice on which manifold set fits your particular tool, please contact Nederman.

On torch welding fume extractionExtraction at source is the most efficient capturing solution for welding fumesWherever it is a viable solution, it has been proven that extraction at source is the most effective and efficient method of capturing and removing welding and similar fumes. Using this method, the risk of the welder or operator being subject to hazardous fumes is minimized.Many welding torches are now designed so the torch itself can easily be connected to the appropriate Nederman extraction unit to pick up most of the hazardous welding fumes. In other cases, Nederman nozzles for welding torches can be used; these are fitted to existing welding torches and are available in three different versions depending on the size of the welding torch.

Welding fumes affect the welder's health conditions, end product quality and production equipment. It reduces capacity, disturbs the production and decreases the bottom line result. A prosperous business demands sound, and safe workplaces. Nederman portable welding fume and dust collectors can make a big change! Capturing fumes at the source is the only effective way to eliminate the health hazard. Nederman\'s portable Welding Fume and Dust Extractors are cost effective for any budget.

Retractable Hose and Cable reelsRetractable hose and cable reels for industrial use, professional tradesmen or do-it-yourself workshopsAll Nederman retractable reels are simple to operate and safe to use. Most of our reels are fitted with ball bearings in the drum and swivel shaft, which makes pulling and retracting the cable easy. High quality seals minimize any risk of leakage. All of our reels have optimized spring force, ensuring that the hose or cable retracts smoothly and evenly onto the drum. The high quality spring is pre-tensioned at the factory to suit a wide range of applications, and is protected inside the drum cavity. Our retractable reels are very easy to mount, either on walls, ceilings or floors.

Welding Curtains and Curtain ScreensEasily movable curtains and curtain screensStandard CurtainsStandard sized curtains provided with 50 mm (2 in.) welded seam all around and with snap-fasteners on both sides for joining to obtain total desired width. Supplied with reinforced holes in the upper edge and steel suspension rings. All standard curtains are made of pliable self extinguishing PVC-material with flash point 320-390ºC (600–730°F). Width: 1400 mm (55 in.), Thickness: 0.40-0.50 mm (0.016–0.020 in.). The Nederman yellow and clear transparent curtains are used for glare, splatter, grinding, dust etc. but are not designed for welding.